Reveal the reasons for rising bearing temperature

In the operation of industrial equipment, bearing stability is crucial, and temperature is a key factor affecting bearing life. Generally, the bearing temperature is too high because there is a problem with the fine points. Let me reveal the little details that may have delayed your work and damaged your machine.

1. Insufficient lubrication: lubricating oil is the protection of bearings! The lack of oil in the bearing may lead to increased friction and rising temperature. [Solution] : Check regularly and add bearing grease or replace bearings regularly according to equipment requirements.

2. Improper lubricating oil: The oil is not right, but also the culprit of temperature. [Solution] : Select the appropriate lubricating oil, ensure its compatibility with the bearing, and replace it according to the manufacturer's recommendation.

3. Poor bearing assembly: improper bearing assembly will increase friction. [Solution] : Ensure that the bearing is installed in accordance with the specified tolerance and coordination, and ask professional and technical personnel to operate if necessary.

4. Excessive load: High load operation will accelerate bearing wear. [Solution] : Adjust the load appropriately according to the bearing specifications to avoid long-term overload operation.

5. Bearing damage: Worn or damaged bearings are the obvious source of temperature rise. [Solution] : Check the running status of the bearing regularly and replace it immediately if any abnormality is found.

We have encountered a pump factory by the bearing temperature is too high and troubled, after cooperation with us. We operated according to the above steps and found that it was caused by improper assembly. After adjustment, the temperature returned to normal, the equipment ran smoothly, and the problem was solved smoothly.

Therefore, in the face of the bearing high temperature problem, what we have to do is to find the reason and use the method skillfully. Blindly worrying can not solve the problem, only scientific analysis and operation, in order to ensure the healthy and stable operation of mechanical equipment oh!