What are the consequences of adding more motor bearing oil?

Hello, everyone, today we are going to explore a common but easily overlooked problem: What are the consequences of adding more motor bearing oil? Have you ever overlubricated yourself because you were worried about insufficient lubrication? Well, you must read this article carefully.

In our actual operation, we often encounter the cognitive misunderstanding of "oil is not a bad thing". The actual situation is that excessive lubricating oil will cause motor bearing heating, motor bearing deviation and even lead to motor bearing wear acceleration, thereby shortening the life of the machine, and in serious cases, the whole machine may be completely scrapped. A small oversight, can bring such serious consequences, have to be paid attention to.

There were also customers who found that we were not full of grease and questioned our corners, and then I knew that most people's approach to motor bearing lubrication is "more than less." But it does create more problems, with machines breaking down frequently and requiring higher repair and replacement costs. This is obviously not a reliable method.

I once discussed this issue with a technician, who stressed the importance of accurately adding lubricating oil, and said that the motor bearings in the factory are greased by the machine on both sides, and there will not be too much or too little grease. For some special working conditions of motor bearings, we will give appropriate recommendations.

The correct filling of grease will make the motor bearing run more smoothly, the failure rate of the machine is significantly reduced, and the maintenance cycle is longer. Without increasing the cost, the efficiency and service life of the machine will be significantly improved. In this way, not only reduce the maintenance cost, but also improve the work efficiency, but also more assured to put into production use.