6201-2RS/2Z Deep Groove Ball Bearing 12x32x10mm High-Speed Precision for Motors, Pumps & Automotive

When selecting bearings, generally consider the bearing arrangement as the shafting, the ease of installation and disassembly, the space allowed by the bearing, the size and the marketability of the bearing, etc., which roughly determine the bearing structure. Next, determine the bearing size while comparing and studying the design life of various machines using bearings and the various durability limits of bearings.

Furthermore, according to different uses, it is necessary to select bearings specially designed for the requirements of precision, clearance, cage structure, grease, etc. However, there is no certain order and rules for selecting bearings. The priority should be the conditions, performance, and most relevant options required for the bearings, especially practical.

Bearing installation should be carried out in a dry and clean environment. Preparations before installation:

Different installation methods need to be adopted according to different bearing sizes and application environments. First, prepare the necessary components, tools and equipment for installation, then prepare all the parts that need to be installed, and clean them thoroughly before installation, and finally inspect the size and shape accuracy of all the parts that need to be installed according to the drawings.

Note: Before the installation preparations are completed, do not unpack the bearings to avoid contamination of the bearings.

Throughout today's market, there are a wide variety of low noise bearings. Before choosing, we should first understand their brands and characteristics. In general, Kent starts with the control of raw materials and uses GCR15, which is more wear-resistant, and has a longer service life. The produced bearings conform to the national ZV4 quality level and reach the P5 and P6 precision levels. As we all know, the higher the bearing accuracy, the smaller the error, in order to achieve the purpose of strong consistency and stable operation. Implement a full inspection of the noise level to ensure that the decibel value of miniature bearings is less than 23 decibels, the decibel value of miniature and small bearings is less than 25 decibels, and the decibel value of small bearings is less than 27 decibels, which is far lower than that of peers.