The bearing ring often occurs in the operation of the equipment, which may be the quality problem of the bearing itself, or other reasons, so how to evaluate the bearing noise?
Bearing noise has a special test standard and is evaluated according to the standard. However, the bearing noise measured by the general bearing noise test equipment is the noise of the bearing on the test machine, not the noise after the bearing is installed. After the bearing is installed, the overall noise of the equipment is measured according to the corresponding standards for each different equipment. However, bearing noise will be submerged in the noise of other reasons in each equipment, and there is generally no specific separation test standard.
The common method in the field is the overall test method of the equipment and the way of manual auscultation. However, the method of manual auscultation has a large discreteness, and the test results are more dependent on the tester, so this test is difficult to achieve objective quantification in terms of rigor.
In a specialized laboratory, the noise measurement of the bearing becomes more accurate, so the separation is also relatively easy.
Artificial recognition can be carried out according to the characteristics of some bearing fault noise to a certain extent, and some artificial intelligence algorithms can be referenced to process the sound signal, so as to separate the noise signal of the bearing characteristics.